========================================
=             Aspicore Ping            =
========================================
Document version:	1.00(001), 24th January 2006

Contents
SECTION 1 - INTRODUCTION
SECTION 2 - RELEASE NOTES
SECTION 3 - USER GUIDE

SECTION 1 - INTRODUCTION ======================== 
This application is a tool for IP network diagnostics.  With this
utility you can measure round-trip-delays and detect packet loss
across network nodes.  The utility also shows your phone's current
local IP and DNS addresses.

SECTION 2 - RELEASE NOTES
=========================

Application version:	1.13(067)

Release note:		
This application is intended for S60 2nd Edition phones.

SECTION 3 - USER GUIDE
======================

1) Before using the Ping utility, you must have configured a TCP/IP
GPRS/3G access point to your phone.

2) After installation, run application.

3) After launching the application, when you first time execute the
Ping command, after entering the host IP or URL, the phone should ask
you to select an access point. (Provided that the setting "Ask before
connecting" is turned on, otherwise the phone may automatically
select the first available access point from the list in the
connection settings.) 

Select the Internet (TCP/IP) access point from the list. MMS and WAP
access points do not work with Ping! 

(If you don't see an Internet access point in the list, try to find
out from your cellular operator, how to add it.) 

4) You can see your phone's external IP address and other network
parameters with the "Tools" -> "Interface info" command while
connected.


More information about Aspicore Ping can be found from
http://www.aspicore.com.